SAFE STEP 200
High performance, two-part, epoxy anti-slip floor coating designed for application in areas of heavy vehicular traffic
High performance safety coating is easy to apply and offers optimum adhesion and slip resistance to metal, concrete and timber surfaces.
Ideal applications include loading bays, vehicular ramps and all areas subject to heavy traffic.
Can be applied to any clean, dry surface by hard roller, trowel or spray.
Resists most acids, alkalis, solvents, grease, oils and salt water.
Product information
Concrete should be at least 28 days old (applying a coating onto concrete less than 28 days old could cause failure of the product).
All oils, grease, dirt, etc. must be removed using a suitable solvent or aqueous de-greaser solution.
All old coatings must be removed (this can be achieved by grit/shot blasting, scabbling or scarifying).
If the surface is not sufficiently rough to ensure a suitable key or where the surface of the concrete is weak the concrete must be etched using a suitable acid etch system if grit/shot blasting cannot be used.
Porous surfaces such as concrete and wood should be primed using SAFE STEP® Non-Metal Primer to seal the surface (metal surfaces should be primed using SAFE STEP® Primer).