SAFE STEP 100

Single pack, epoxy ester anti-slip floor coating designed for application in areas of heavy pedestrian traffic

• Easy to apply and offers optimum adhesion to metal, concrete and timber surfaces.
• Shelf life of up to two years if stored in unopened containers.
• Partially used container may be resealed and retained for future use.
• Resists petrol, oil, acids and aliphatic solvents.

Product information

Concrete should be at least 28 days old (applying a coating onto concrete less than 28 days old could cause failure of the product).

All oils, grease, dirt, etc. must be removed using a suitable solvent or aqueous de-greaser solution.

All old coatings must be removed (this can be achieved by grit/shot blasting, scabbling or scarifying).

If the surface is not sufficiently rough to ensure a suitable key or where the surface of the concrete is weak the concrete must be etched using a suitable acid etch system if grit/shot blasting cannot be used.

Porous surfaces such as concrete and wood should be primed using SAFE STEP® Non-Metal Primer to seal the surface (metal surfaces should be primed using SAFE STEP® Primer).

Enquire Chat with an Expert